The AM/FM/NOAA antenna kit is an ultra-wide range external receiving aerial with a usable frequency coverage of 30 kHz to 2 GHz - short wave/VHF/UHF.
The AM/FM/NOAA Antenna Kit is designed for areas where space is a problem or when an "unobtrusive" installation is essential. The Antenna Kit is a passive arrangement providing two whip elements: a long element for short wave up to 30 HMz and a second shorter loaded whip aerial for frequencies up to 2 GHz, the loading coils are tuned around 150 & 800 MHz to enhance performance of the UHF & UHF bands. The aerial is very compact being just 1.80m in total height. A single coaxial lead feeds both whips in a weather proof enclosure which in turn bolts to a suitable supporting mast (not provided).
Approximately 15m of terminated coaxial cable is supplied ready to plug in and go! The AM/FM/NOAA Antenna Kit is easy to assemble and use, an instruction sheet is supplied with the aerial, "V" bolts and clamps are included but a small stub mast will be required for installation which should be as high as possible and in clear space. Run the coaxial cable to your listening location, the path should not be important but avoid power cables, TV downleads and computers.
Should you need to remove the BNC plug make sure you have a spare to re-fit, if you have difficulty in locating a plug then another is obtainable for a small charge. If you need to extend the cable, always use a good quality 50 OHM coaxial cable such as UR43 or UR 76 (or quality RG58/U) and low loss connectors. If a long lead is required (20m plus), consider replacing the entire run with a heavier duty low loss cable such as UR67 or RG213.
Trilithic’s warranty policy for Emergency Alert Systems (EAS) Equipment extends for two (2) years from the date of shipment, If covers mistakes or deficiencies in materials and workmanship.
Exclusions from coverage are for any of the following events occurring after the product has
If the EAS product is diagnosed as having failed for reasons other than the exclusions listed above, please call 888-895-7629 and request an RMA (Return Merchandise Authorization) number.
All returned merchandise must have the symptom clearly identified in writing, signed by the authorized representative of the sender and attached to the failed product. All returned merchandise must bear the RMA Number clearly marked in large numerals on the outside of the shipping carton.
All such failed products must be shipped to: Trilithic, Inc. 9710 Park Davis Drive, Indianapolis, IN 46235
EAS products returned without an RMA number clearly marked are subject to a twenty percent (20%) processing fee.
Trilithic, Inc. offers an optional EAS warranty period extension of two (2) years on materials and five (5) years on workmanship from the expiration of the original warranty period. This option must be exercised at the time of the original product purchase.